testCamera.py

Go to the documentation of this file.

# This file is part of obs_test.
#
# Developed for the LSST Data Management System.
# This product includes software developed by the LSST Project
# (http://www.lsst.org).
# See the COPYRIGHT file at the top-level directory of this distribution
# for details of code ownership.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
__all__ = ["TestCamera"]
 
import numpy as np
 
import lsst.afw.cameraGeom as cameraGeom
import lsst.geom as geom
import lsst.afw.geom as afwGeom
 
 
class TestCamera(cameraGeom.Camera):
    """A simple test Camera.
 
    Notes
    -----
    The camera has one ccd with name "0".
    That CCD has four amplifiers with names "00", "01", "10", and "11".
 
    The camera is modeled after a small portion of the LSST sim
    Summer 2012 camera: a single detector with four amplifiers,
    consisting of raft 2,2 sensor 0,0, half of channels 0,0 0,1 1,0 and 1,1
    (the half closest to the Y centerline).
 
    Note that the Summer 2012 camera has one very weird feature:
    the bias region (rawHOverscanBbox) is actually a prescan
    (it appears before the data pixels).
 
    A raw image has the sky in the same orientation on all amplifier
    subregions, so no amplifier subregions need their pixels to be flipped.
 
    Standard keys are:
 
    * ``amp``: amplifier number: one of 00, 01, 10, 11
    * ``ccd``: ccd number: always 0
    * ``visit``: exposure number; test data includes one exposure
        with visit=1
    """
    def __new__(cls):
        plateScale = geom.Angle(20, geom.arcseconds)  # plate scale, in angle on sky/mm
        # Radial distortion is modeled as a radial polynomial that converts from focal plane (in mm)
        # to field angle (in radians). Thus the coefficients are:
        # C0: always 0, for continuity at the center of the focal plane; units are rad
        # C1: 1/plateScale; units are rad/mm
        # C2: usually 0; units are rad/mm^2
        # C3: radial distortion; units are rad/mm^3
        radialCoeff = np.array([0.0, 1.0, 0.0, 0.925]) / plateScale.asRadians()
        fieldAngleToFocalPlane = afwGeom.makeRadialTransform(radialCoeff)
        focalPlaneToFieldAngle = fieldAngleToFocalPlane.inverted()
 
        camera = cameraGeom.Camera.Builder("test")
        cls._makeDetectors(camera, focalPlaneToFieldAngle)
        camera.setTransformFromFocalPlaneTo(cameraGeom.FIELD_ANGLE, focalPlaneToFieldAngle)
        return camera.finish()
 
    def __init__(self):
        pass
 
    @classmethod
    def _makeDetectors(cls, camera, focalPlaneToFieldAngle):
        """Make a list of detectors
 
        Parameters
        ----------
        camera : `lsst.afw.cameraGeom.camera.Builder`
            Camera to append detectors to.
        focalPlaneToFieldAngle : `lsst.afw.geom.TransformPoint2ToPoint2`
            Transform from ``FOCAL_PLANE`` to ``FIELD_ANGLE`` coordinates
            in the forward direction.
        """
        detectorConfigList = cls._makeDetectorConfigList()
        for detectorConfig in detectorConfigList:
            amplifiers = cls._makeAmplifierCatalog()
            detBuilder = cameraGeom.addDetectorBuilderFromConfig(
                camera,
                detectorConfig,
                amplifiers,
                focalPlaneToFieldAngle,
            )
            if detBuilder is None:
                raise RuntimeError("Could not add detector!")
 
    @classmethod
    def _makeDetectorConfigList(cls):
        """Make a list of detector configs
 
        Returns
        -------
        detectorConfigList : `list` of `lsst.afw.cameraGeom.DetectorConfig`
            List of detector configs.
        """
        # this camera has one detector that corresponds to a subregion of lsstSim detector R:2,2 S:0,0
        # with lower left corner 0, 1000 and dimensions 1018 x 2000
        # i.e. half of each of the following channels: 0,0, 0,1, 1,0 and 1,1
        detector0Config = cameraGeom.DetectorConfig()
        detector0Config.name = '0'
        detector0Config.id = 0
        detector0Config.serial = '0000011'
        detector0Config.detectorType = 0
        detector0Config.bbox_x0 = 0
        detector0Config.bbox_x1 = 1017
        detector0Config.bbox_y0 = 0
        detector0Config.bbox_y1 = 1999
        detector0Config.pixelSize_x = 0.01
        detector0Config.pixelSize_y = 0.01
        detector0Config.transformDict.nativeSys = 'Pixels'
        detector0Config.transformDict.transforms = None
        detector0Config.refpos_x = 2035.5
        detector0Config.refpos_y = 999.5
        detector0Config.offset_x = -42.26073
        detector0Config.offset_y = -42.21914
        detector0Config.transposeDetector = False
        detector0Config.pitchDeg = 0.0
        detector0Config.yawDeg = 90.0
        detector0Config.rollDeg = 0.0
        return [detector0Config]
 
    @classmethod
    def _makeAmplifierCatalog(cls):
        """Construct an amplifier info catalog
 
        Returns
        -------
        ampCatalog : `List` of `lsst.afw.cameraGeom.Amplifier.Builder()
            Amplifier information catalog.
 
        Notes
        -----
        The LSSTSim S12 amplifiers are unusual in that they start with 4 pixels
        of usable bias region (which is used to set rawHOverscanBbox, despite the name),
        followed by the data. There is no other underscan or overscan.
        """
        xDataExtent = 509  # trimmed
        yDataExtent = 1000
        xBiasExtent = 4
        xRawExtent = xDataExtent + xBiasExtent
        yRawExtent = yDataExtent
        readNoise = 3.975  # amplifier read noise, in e-
        saturationLevel = 65535
        linearityType = cameraGeom.NullLinearityType
        linearityCoeffs = [0, 0, 0, 0]
 
        ampCatalog = []
        for ampX in (0, 1):
            for ampY in (0, 1):
                # amplifier gain (e-/ADU) and read noiuse (ADU/pixel) from lsstSim raw data
                # note that obs_test amp <ampX><ampY> = lsstSim amp C<ampY>,<ampX> (axes are swapped)
                gain = {
                    (0, 0): 1.7741,     # C0,0
                    (0, 1): 1.65881,    # C1,0
                    (1, 0): 1.74151,    # C0,1
                    (1, 1): 1.67073,    # C1,1
                }[(ampX, ampY)]
                readNoise = {
                    (0, 0): 3.97531706217237,   # C0,0
                    (0, 1): 4.08263755342685,   # C1,0
                    (1, 0): 4.02753931932633,   # C0,1
                    (1, 1): 4.1890610691135,    # C1,1
                }[(ampX, ampY)]
                amplifier = cameraGeom.Amplifier.Builder()
                amplifier.setName("%d%d" % (ampX, ampY))
                amplifier.setBBox(geom.Box2I(
                    geom.Point2I(ampX * xDataExtent, ampY * yDataExtent),
                    geom.Extent2I(xDataExtent, yDataExtent),
                ))
 
                x0Raw = ampX * xRawExtent
                y0Raw = ampY * yRawExtent
 
                # bias region (which is prescan, in this case) is before the data
                readCorner = cameraGeom.ReadoutCorner.LL
                x0Bias = x0Raw
                x0Data = x0Bias + xBiasExtent
 
                amplifier.setRawBBox(geom.Box2I(
                    geom.Point2I(x0Raw, y0Raw),
                    geom.Extent2I(xRawExtent, yRawExtent),
                ))
                amplifier.setRawDataBBox(geom.Box2I(
                    geom.Point2I(x0Data, y0Raw),
                    geom.Extent2I(xDataExtent, yDataExtent),
                ))
                amplifier.setRawHorizontalOverscanBBox(geom.Box2I(
                    geom.Point2I(x0Bias, y0Raw),
                    geom.Extent2I(xBiasExtent, yRawExtent),
                ))
                amplifier.setRawXYOffset(geom.Extent2I(x0Raw, y0Raw))
                amplifier.setReadoutCorner(readCorner)
                amplifier.setGain(gain)
                amplifier.setReadNoise(readNoise)
                amplifier.setSaturation(saturationLevel)
                amplifier.setSuspectLevel(float("nan"))
                amplifier.setLinearityCoeffs([float(val) for val in linearityCoeffs])
                amplifier.setLinearityType(linearityType)
                # amplifier.setHasRawInfo(True)
                amplifier.setRawFlipX(False)
                amplifier.setRawFlipY(False)
                amplifier.setRawVerticalOverscanBBox(geom.Box2I())  # no vertical overscan
                amplifier.setRawPrescanBBox(geom.Box2I())  # no horizontal prescan
                ampCatalog.append(amplifier)
        return ampCatalog